Detalles de los casos

En casa / Casos De Trabajo /

Casos de empresas sobre Why Do Instruments and Meters Need Lightning Protection Grounding?

Why Do Instruments and Meters Need Lightning Protection Grounding?

2026-11-06

Instrument lightning protection grounding is mainly to guard against induced lightning. When lightning strikes nearby, long cables act like antennas and induce instantaneous high voltage, which can break through the instrument's chips.

último caso de la compañía sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 0
On-site damage commonly appears in three forms: data jumps, communication interruptions, and module burnout. The electronic components in industrial instruments typically have low voltage tolerance—a few thousand volts of surge is enough to cause a fault.

último caso de la compañía sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 4
It mainly relies on three coordinated measures:
●SPD Current Diversion — Installed on power lines and signal lines, it quickly conducts when a surge arrives, directing the current to the grounding busbar.
●Equipotential Bonding — Bond the instrument housing, cable trays, pipes, and cabinets together. When lightning strikes, all components rise in potential together, reducing the risk of mutual breakdown.

último caso de la compañía sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 8
●Shielding and Grounding — Metal cable trays, conduit pipes, and cable shielding layers must be continuously conductive and connected to a unified grounding system.

último caso de la compañía sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 12
Where failures most often occur:
●Ground wires that are too long — SPD grounding wires should generally be kept within 0.5 meters. Excessive length generates additional voltage, and the residual voltage may exceed the instrument's tolerance.
●Focusing only on grounding resistance — A qualified resistance only indicates a good DC path. The connection path during a lightning strike is equally critical.

último caso de la compañía sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 16
●Complete isolation of different grounds — During a lightning strike, a high potential difference can appear between different grounds, making equipment breakdown more likely.
●Cable trays broken midway — Loose connections, paint, or corrosion can break electrical contact, weakening the shielding effect.
So, effective lightning protection grounding means giving surges a short and reliable path while keeping all related metal parts at roughly the same potential.

último caso de la compañía sobre Why Do Instruments and Meters Need Lightning Protection Grounding? 20

15901050329

Enlace rápido

En casa Sobre nosotros Productos Casos de trabajo Noticias descargar El video Contacta con nosotros

Contacto rápido

Dirección

Bloque V5, ciudad industrial de Ronghao, distrito de Gaoling, ciudad de Xi'an, provincia de Shaanxi

Teléfono

86--15901050329

El correo electrónico

lijunrong@china-nyjy.com

15901050329

Nuestro boletín

Suscríbete a nuestro boletín para obtener descuentos y más.

Política de privacidad | Mapa del sitio | China es buena. Calidad Transmisor de nivel de radar Proveedor. Derecho de autor 2022-2026 Shaanxi Nuoying Automation Instrument Co., Ltd. Todo. Todos los derechos reservados.

Transmisor de nivel de radar

Transmisor de nivel ultrasónico

Transmisor de nivel magnético

Transmisor de nivel de admitancia de RF

Medidor de nivel magnetoestrictivo

Transmisor de sensor de presión

Sensor del transmisor de la temperatura

Metro de flujo electromágnetico

metro de flujo total

Metro de flujo ultrasónico

Metro de flujo de la turbina

Interruptor de nivel de diapasón

Interruptor de nivel de admitancia de RF

Interruptor de nivel de paleta giratoria

Cambiador de nivel de microondas

Interruptor externo de nivel de líquido

Medidor de densidad de diapasón